GSM Automated And Unmanned Control System Of Railway Crossing
This project takes control over the unmanned railway crossing by giving great preference to the safety of train as well as road vehicles.
The railway gate is opened and closed automatically using microcontroller. The microcontroller is programmed such that it gets the indication of train‘s arrival and departure through the wireless sensor unit. The sensor unit is a composite unit controlling IR sensor and RF communication. The RF transmitter transmits the encoded sensor signal to microconroller unit sensor unit when train has trespass the sensor. . The microcontroller unit receives and decoded the transmitted signal. With reference to the signal received the gate is either closed or opened along with an alarm. Whenever the signal received gate IR sensor is activated to check whether any vehicle is there in front of the gate before the gate is closing. If any vehicle is there in front of the gate the train signal will be in RED till the gate is open i.e. the vehicle has crossed the gate, a the signal
status is transmitted to the nearest railway station the communication used here is GSM.
Labels : Electrical Thesis and Dissertation, Electronics Dissertation Samples, IEEE Dissertation Format, IEEE Dissertation Citation, IEEE Electrical Dissertation, IEEE Cite Dissertation,IEEE Thesis Papers, IEEE Dissertation Introduction, IEEE Dissertation Ideas, IEEE Standards for Dissertation, IEEE Reference Format Dissertation, IEEE Format for Dissertation Report, IEEE Thesis Topics, IEEE Dissertation Examples, IEEE Reference Dissertation, Electrical Dissertation Proposal, Electrical Dissertation Samples, Electrical Dissertation Writing, Electronics Dissertation Proposal, Electronics Dissertation Writing, Electrical Engineering Dissertation, Electrical Dissertation Topics, Electronics Dissertation Ideas Topics