The frequency counter has 6 digits and will work from 25MHz up to 200MHz.The best with this counter is that you don't need to connect it with any wires to your equipment. Wires=interference and drift in the oscillation frequency. This counter use a small pick up coil to probe the oscillation. Just hold the pickup coil a few cm from the main oscillator coil and read the LED.
The LED has 6 digits and the resolution is set to 1kHz.This counter is perfect to check that oscillators are working and at which frequency.
Labels : Electrical Thesis and Dissertation, Electronics Dissertation Samples, IEEE Dissertation Format, IEEE Dissertation Citation, IEEE Electrical Dissertation, IEEE Cite Dissertation,IEEE Thesis Papers, IEEE Dissertation Introduction, IEEE Dissertation Ideas, IEEE Standards for Dissertation, IEEE Reference Format Dissertation, IEEE Format for Dissertation Report, IEEE Thesis Topics, IEEE Dissertation Examples, IEEE Reference Dissertation, Electrical Dissertation Proposal, Electrical Dissertation Samples, Electrical Dissertation Writing, Electronics Dissertation Proposal, Electronics Dissertation Writing, Electrical Engineering Dissertation, Electrical Dissertation Topics, Electronics Dissertation Ideas Topics